The seating plate is a monitoring system that can be established within reasonable budgets in areas exposed to high amounts of vertical deformation.
A base plate, reference level bar, and sleeves used to connect them are included in the system, and system components can be assembled within minutes to monitor the settlement of many structures such as dams, transportation structures, engineering fills, embankments, and foundations. The settlement plate system can be used in conjunction with other monitoring systems to track deformation.
You can obtain the GeoAnts seating plate set ready for use at your construction site, with all components, through direct stock delivery options.
Easy Setup and Use
The base plate is placed on the planned surface after being joined with one side of the reference rod, and the upper elevation of the rod is measured using an independent reference point. Then, the base plate is gradually raised by covering it with filling material, and elevation measurements continue to be made as reference rods are added step by step along with the filling. After the completion of the filling structure, an elevation measurement is taken once again from the upper elevation of the guide rod, and measurements are repeated periodically to monitor the settlement behavior of the structure.
Order Details
- Please specify the total number of reference bars (each 1 m long) calculated in accordance with the base plate you need with your order and the filling heights at each location.
- The base plate comes with a special connection piece and a special external protection section with a length of L=0.5 m, which will be fixed on the base interface.
- For your requests including different base plate sizes and materials, please contact us.
PDF Dumps
Highlights
- Easy to use and cost-effective solution.
- Steel seating plate measuring 60 cm x 60 cm, with a thickness of 10 mm. (Please contact us for different material options).
- Galvanized steel reference rod with a diameter of 20 mm and a length of 1m, with threaded ends.
- Galvanized steel sleeve, threaded at both ends.
- Top cover, with one end threaded.
Application Areas
- Debts and barriers
- Storage tanks
- Surcharge loads
- Dams
- The Foundations
- Road structures
Basic Information
- Seating Plate: GA –SP Model V.1.01
- Top Cover: GA-SP-TC
- Sleeve: GA-SP-CP
- Base Plate: GA-SP-BP
- Reference Bar: GA-SP-RP
You can contact us at the addresses below for detailed information about the product.
geoants@geodestek.com
T: +90 552 350 13 99
WhatsApp Information-Order Line
www.geodestek.com