A Load Cell is a transducer that converts the strain or deformation caused by a load or force acting on it into an electronic signal. This signal can be a voltage change, current change, or frequency change, depending on the type of load cell and circuit. The load cell provides a warning signal when exposed to sudden load changes; in other words, load cells behave like springs, measuring by deforming. Load cells can be used in many areas.
The use of load cells is also common in places where weighing processes are prevalent, such as laboratory measurements and factories.
The product price specified as the connection header is valid for the green colored header.
Please contact us for a different connection header option.
*The price given for Klemens includes labor.
Load Cells with High Durability in Different Capacities
|
APPLICATION |
Batch Scale |
|
Model |
YZC-516C |
|
Capacity (t) |
0.1, 0.2, 0.3, 0.5, 1, 2 |
|
Nominal Output (MV/V) |
2.0±0.05 |
|
Accuracy Class |
C2 |
|
Maximum Validation Range Number (nmax) |
2000 |
|
Minimum Load Cell Verification Ranges (Vmin) |
ANDMax/5000 |
|
Combined Error Share (%RO) |
<±0.030 |
|
Creep (%RO/30 min) |
0.02 |
|
Sensitivity Temperature Effect (%RO/°C) |
0.0017 |
|
Zero Temperature Effect (%RO/°C) |
0.005 |
|
Zero Balance (%RO) |
±1.0 |
|
Input Resistance (Ω) |
365±5 |
|
Output Resistance (Ω) |
350±3 |
|
Insulation Resistance (MΩ<50V>) |
5000 |
|
Recommended Alarm Voltage (V) |
5~12 |
|
Compensated Temperature Range (°C) |
-10~+40 |
|
Operating Temperature Range (°C) |
-30~+80 |
|
Safe Overload (%RO) |
150 |
|
Final Overload (%RO) |
200 |
|
Load Cell Material |
Alloy Steel |
|
Connection Cable |
∅5.0x3.5m |
You can contact us at the addresses below for detailed information about the product.
geoants@geodestek.com
T: +90 552 350 13 99
WhatsApp Information-Order Line
www.geodestek.com